SAG Mills
 DescriptionDia. (ft)Length (ft)Horsepower

40' x 25' NEW FL Smidth Sag Mill

Motor not included but designed for 26,000 Kw wrap around GMD motor (34,866 HP), 9.31 RPM. Designed for ambient environment 975 meters (3200 ft) above sea level, Max Volumetric Load 45%. Liners Excluded. Motor and Drive available at additional cost.

Key Components Included:

  • Mill Jacking Cradles
  • Jacking System
  • Hydraulic Braking System
  • 40
  • 25
  • 35000
 DescriptionDia. (ft)Length (ft)Horsepower

38' x 25'5" New Metso Sag Mill

Motor not included but designed for 19,400 Kw wrap around motor (26,000 HP), 8 RPM, Variable Speed Drive, Max Volumetric Load 35%. Liners Excluded.
Motor & Drive Available for Additional Cost.

Key Components Included:
  • Complete Lubrication System
  • Feed Chute
  • Trommel Screen
  • Braking System
  • Mill Jacking Cradles
  • Specialty Tools
  • Export Packaging
  • Sound Monitor


SPARES AVAILABLE - Additional Cost

  • 38
  • 25.5
  • 26000
 DescriptionDia. (ft)Length (ft)Horsepower

30' x 7' Allis Minerals (Svedala) Sag Mill

  • 4000 hp motor, 200 RPM, 3300 V, 214 amps
  • Mill was installed in 1993; still intact and gets turned every 2 weeks
  • Clutch: Airflex 52cv
  • Overall condition is excellent
  • 30
  • 7
  • 4000
 DescriptionDia. (ft)Length (ft)Horsepower

Hardinge 24' x 8' Sag Mills (3)

  • Each with 2 Flender gearboxes, Model ZTNW1430
  • No motors or liners
  • Previously ran on dual 1000 hp motors
  • Ring Gear teeth - 217
  • Pinion Gear Teeth - 20 Each
  • 24
  • 8
  • 0
 DescriptionDia. (ft)Length (ft)Horsepower

23' x 5.7' Krupp Polysius Sag Mill

  • 1000 kW, 6600 volt Teco Drive Motor
  • Unit was new in 1995
  • Reported to be in excellent condition
  • Complete with liner handler
  • Mill Speed 13.5 rpm
  • 23
  • 5.7
  • 1340
 DescriptionDia. (ft)Length (ft)Horsepower

Hardinge 22' x 7' Sag Mills (4)

  • Each with 2 Tacke gearboxes
  • Type NI-80, 800 kw, 6.6269:1 ratio, input 712 RPM, output 113.7 RPM
  • No motors or liners; previously ran on dual 800 hp motors
  • Bull gear - 134 teeth
  • 2 Pinions - 22 teeth
  • 22
  • 7
  • 0
 DescriptionDia. (ft)Length (ft)Horsepower

18' x 6' Hardinge (Koppers) Sag Mills (2)

  • 1000HP Siemens Allis Motor
  • Falk Gear Reducer
  • 15.25" Wide single Helical Gear 202 T
  • Eaton Yale Clutch
  • Spare Bull Gear (additional cost)
  • 30-Tooth Pinion
  • Spare Pinions (additional cost)
  • Removed, ready for transport
  • 18
  • 6
  • 1000
 DescriptionDia. (ft)Length (ft)Horsepower

17' x 5' Aerofall Sag Mill (3)

  • (Motors no longer available) 600 HP synchronous motor, Canadian General Electric, 225 rpm
  • 248 teeth spur gear; 18 teeth pinion
  • mill rpm: 16.3
  • still installed
  • liners in mill
  • three identical mills to choose from
  • 17
  • 5
  • 600
 DescriptionDia. (ft)Length (ft)Horsepower

14'8" x 15'8" Thune Autogenous Mills (2)

  • 2250HP (1676 kw) Drive Motors
  • Manufacturer: Thune
  • Type: Autogenous
  • Shell Dimensions: 4500 mm x 4800 mm
  • Manholes: Two Heads:
  • Feed/Discharge 2 pieces each
  • Direction of Rotation: Clockwise
  • Speed Reducer: David Brown
  • Number: G120034
  • Type: H 32
  • RPM: 740/162.576 Set 1
  • Speed Reducer Ratio: 1:4.6
  • Mills are reported to be in very good condition.
  • 14'8
  • 15'8
  • 2250
 DescriptionDia. (ft)Length (ft)Horsepower

13'6" x 4' Marcy Sag Mill

  • Dry grind
  • Previously ran on 300 Hp drive motor, 575 Volt
  • Mill is in excellent condition
  • Disassembled with assistance from Svedala personnal and matchmarked for reassembly
  • Mill trunnions and all sensitive parts have been protected for storage
  • Bull Gear looks very good
  • Pinion Gear in very good condition
  • 13.5
  • 4
  • 300
 DescriptionDia. (ft)Length (ft)Horsepower

6' x 3' Allis Chalmers Sag Mill

  • Siemens-Allis 40 HP drive motor, 1765 RPM, Type RGZ, 97.2/48.6 Amps, 3 ph, 60 Hz, 230/460 Volts
  • Falk gear reducer, Model 401-7E22-06A, 82 RPM, 21.35:1 ratio, 40 hp. Class 1
  • 6
  • 3
  • 40